Packet Tracer Exploration: Configuring Discontiguous Routes 7.1.2.3

In this packet tracer exploration activity, I am presented with a network topology that consists of three routers. R1, R2, and R3. There are two switches connected to R1 which are named R1 LAN0 and R1 LAN1. One switch is connected to R2 called R2 LAN. One switch is also connected to R3 which is named R3 LAN. It asked me to make basic RIP configurations, which it involved the "router rip" command. Then I put in all the networks necessary by using the "Network [ip address]" command. Afterwards, i issued the commands "passive-interface [interface]" command so that it can suppress sending updates out those interfaces. I then saved by issuing the copy run start command. I repeated this process throughout the rest of the routers in order to finish the rest of the packet tracer activity. I reviewed on how to do basic configuration for RIP throughout the network