Packet Tracer Exploration: Challenge Router Configuration

In this packet tracer activity, I designed and applied an IP addressing scheme for the topology show in the Topology Diagram. I allocated one class C network that i needed to subnet in order to provide a logical addressing scheme for the network. I cabled the network all together appropriately. Once the network is cabled, I configured each device with its appropriate basic configuration commands. The routers were then ready for interface address configuration according to the IP addressing scheme. When the configuration is complete, I used IOS commands to verify that the network is working properly. In this activity, I learned to subnet an address with the space it gave me. I was able to assign appropriate addresses to interfaces and document. I reviewed how to cable the network and perform basic configuration tasks on a router. I learned to configure and activate serial and FastEthernet interfaces. I then tested and verified all my configurations.